Date/Timer - Kyocera Mita KM-2560 Service Manual

2H0/2HZ
Auto color correction
Adjust the detection level used by the machine to deter-
mine whether the original is color or monochrome during
sending.
1. Press [Change] of Auto Color Detection Level.
2. Press the key to set the detection level.
3. Press [OK].
System initialization
Initialize the hard disk mounted on the machine to return
to the default mode.
CAUTION: System initialization will erase Custom Docu-
ment Boxes, data stored in Document Box, addresses in
the Address Book, user property, account information,
and settings.
1. Press [Execute] of System Initialization.
2. When user login administration is invalid, the user
authentication screen is displayed. Enter a login
user name and password, and press [Login].
Initial setting: 3060 respectively
3. Press [Yes].
4. Once the initialization ends, the message indicating
[Task is completed. Turn the main power switch off
and on.] appears.
Turn the main power switch off and on.
1-3-92

(10) Date/Timer

Date/Time
Set the date and time for the location where you use the
machine.
1. Press [Change] of Date/Time.
2. Enter the date and time respectively using the
[+]/[-].
3. Press [Off] or [On] of Summer Time and press [OK].
Time zone
Set the time difference in the location you are from GMT.
1. Press [Change] of Time Zone.
2. Select the location using the cursor up/down keys.
3. Press [OK].
Date format
Select the display format of year, month, and date.
1. Press [Change] of Date Format.
2. Select [MM/DD/YYYY], [DD/MM/YYYY], or
[YYYY/MM/DD].
3. Press [OK].
Auto panel reset
If no job runs for a certain period of time, automatically
reset settings and return to the default setting.
Auto panel reset ON/OFF
Select to use auto panel reset or not.
1. Press [Change] of Auto Panel Reset.
2. Press [Off] or [On].
3. Press [OK].
Reset timer
If you select [On] for auto panel reset, set the amount of
time to wait before auto panel reset.
1. Press [Change] of Reset Timer.
2. Enter the time using the [+]/[-].
3. Press [OK].
Auto low power mode
Set the amount of time to wait before Auto Low Power
Mode.
1. Press [Auto Low Power Mode].
2. Enter the time using the [+]/[-] or numeric keys.
3. Press [OK].
Auto sleep
If no job runs for a certain period of time, automatically
enter sleep mode.
Auto sleep ON/OFF
Select whether to use auto sleep or not.
1. Press [Change] of Auto Sleep.
2. Press [Off] or [On].
3. Press [OK].