Date/Timer/Energy Saver - Kyocera ECOSYS M3645idn Operation Manual

Setup and Registration (System Menu) > System Menu

Date/Timer/Energy Saver

[System Menu/Counter] key > [Date/Timer/Energy Saver]
Configures settings related to the date and time.
Item
Date/Time
Date Format
Time Zone
Auto Panel Reset
Panel Reset Timer
Low Power Timer
Sleep Level (models except for
Europe)
Sleep Rules
Set the date and time for the location where you use the machine. If you perform Send as E-
mail, the date and time set here will be displayed on the header.
Value: Year (2000 to 2037), Month (1 to 12), Day (1 to 31), Hour (00 to 23), Minute (00 to
59), Second (00 to 59)
Setting Date and Time (page 2-24)
NOTE
If you change the date/time while using the trial version of an application, you will no longer be
able to use the application.
Select the display format of year, month, and date. The year is displayed in Western notation.
Value: Month/Day/Year, Day/Month/Year, Year/Month/Day
Set the time difference from GMT. Choose the nearest listed location from the list. If you select
a region that utilizes summer time, configure settings for summer time.
If no jobs are run for a certain period of time, automatically reset settings and return to the
default setting. Select to use Auto Panel Reset or not.
Value: Off, On
NOTE
The time allowed to elapse before the panel is reset is set with the following:
Panel Reset Timer (page 8-46)
If you select [On] for Auto Panel Reset, set the amount of time to wait before Auto Panel Reset.
Value: 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [Auto Panel Reset] is set to [On].
Set amount of time before entering the Low Power mode.
Value
For Europe: 1 to 120 minutes (1 minute increments)
Except for Europe: 1 to 240 minutes (1 minute increments)
Low Power Mode (page 2-33)
Select the sleep level.
Set the Energy Saver mode to reduce power consumption even more than Quick Recovery
mode.
Value: Quick Recovery, Energy Saver
NOTE
This function will not be displayed when the optional Network Interface Kit is installed.
Select whether to use the Energy Saver mode for the following functions individually:
*1
• Card Reader
• Application
Value: Off, On
NOTE
When the machine has entered sleep mode with Energy Saver setting, the ID card cannot be
recognized.
8-46
Description