Cleaning And Charge Erasing Sections - Kyocera Mita KM-2560 Service Manual

2-1-6

Cleaning and charge erasing sections

The cleaning section consists of the cleaning blade that removes residual toner from the drum surface after the transfer
process, and the cleaning spiral that carries the residual toner back to the waste toner box.
The cleaning lamp (CL) consists of LEDs and removes residual charge on the drum before main charging.
Also the toner quantity in the waste toner box is sensed with the overflow sensor (OFS).
Cleaning roller
Drum
Figure 2-1-17 Cleaning and charge erasing sections block diagram
Cleaning spiral
Figure 2-1-16 Cleaning and charge erasing sections
CL
OFS
Cleaning blade
Cleaning
lamp (CL)
Drum
ERASE1N
YC1-A7
ERASE2N
YC1-A6
ERASE3N
YC1-A5
EPWB
TONEFUL
YC1-A2
2H0/2HZ
2-1-13