Detaching And Refitting The Laser Scanner Unit - Kyocera Mita KM-2560 Service Manual

2H0/2HZ

(5) Detaching and refitting the laser scanner unit

Follow the procedure below to replace the laser scanner unit.
Procedure
1. Open the front cover.
2. Remove the toner container.
3. Remove the waste toner box.
4. Remove the screw and remove the front
right cover.
5. Remove the claw and remove the toner hop-
per wire cover.
1-5-30
Screw
Front cover
Front right cover
Figure 1-5-54
Toner hopper
Claw
wire cover
Toner hopper
wire cover
Figure 1-5-55