Kyocera Mita KM-2560 Service Manual page 97

Maintenance
item No.
Side ejection setting
U328
Description
Sets whether to eject to the side of the machine when an optional curl eliminator is installed.
Purpose
Set according to the preference of the user.
Setting
1. Press the start key.
2. Select ON or OFF.
Display
ON
OFF
Initial setting: OFF
3. Press the start key. The setting is set.
4. Turn the main power switch off and on.
Setting the size conversion factor
U332
Description
Sets the coefficient of nonstandard sizes in relation to the A4/Letter size. The coefficient set here is used to
convert the black ratio in relation to the A4/Letter size and to display the result in user simulation.
Purpose
To set the coefficient for converting the black ratio for nonstandard sizes in relation to the A4/Letter size.
Setting
1. Press the start key.
2. Change the setting using the +/- keys.
Description
Size parameter
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Setting the drum heater ON/OFF
U339
Description
Turns the drum heater on or off during sleep mode.
Purpose
Set according to the preference of the user.
Setting
1. Press the start key.
2. Change the setting using the +/- or numeric keys.
Display
MODE
*: The drum heater is off at sleep mode when the value is 0.
The drum heater is on at sleep mode when the value is between 1 and 4.
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Description
To eject to the side of the machine
Not to eject to the side of the machine
Description
Setting the drum heater ON/OFF
Setting range Initial setting
0.1 to 3.0 1.0
Setting range Initial setting
0 to 4* 0
2H0/2HZ
1-3-61