Kyocera Mita KM-2560 Service Manual page 91

Maintenance
item No.
Checking the DP switches
U244
Description
Displays the status of the respective switches in the optional DP.
Purpose
To check if respective switches in the optional DP operate correctly.
Method
1. Press the start key.
2. Turn the respective switches on and off manually to check the status.
When a switch is detected to be in the ON position, the display for that switch will be highlighted.
Display
DP SET SW
DP PSD SW
DP REV SW
CCD TIMING SW
DP COVER SW
DP OPEN SW
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Checking messages
U245
Description
Displays a list of messages on the touch panel of the operation panel.
Purpose
To check the messages to be displayed.
Method
1. Press the start key.
2. Select the item to be displayed.
3. Displays the message one by one using cursor up/down keys. Switches the language on the touch
panel using the cursor left/right keys.
When a message number is entered with the numeric keys and then the start key is pressed, the mes-
sage corresponding the specified number is displayed.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Switches
Original set switch (OSSW)
Original size length switch (OSLSW)
Original switchback switch (OSBSW)
DP timing switch (DPTSW)
DP interlock switch (DPILSW)
DP open/close switch (DPOCSW)
2H0/2HZ
1-3-55