Kyocera Mita KM-2560 Service Manual page 69

Maintenance
item No.
Adjustment: Trailing edge registration
U071
1. Press the system menu key.
2. Place an original on the DP and press the start key to make a test copy.
3. Press the system menu key.
4. Change the setting value using the +/- or numeric keys.
For copy example 1, increase the value. For copy example 2, decrease the value.
5. Press the start key. The value is set.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following adjustments in
maintenance mode.
U071
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Original
Copy
example 1
Figure 1-3-15
U404
(P.1-3-66)
Copy
example 2
2H0/2HZ
1-3-33