Kyocera Mita KM-2560 Service Manual page 42

2H0/2HZ-1
Maintenance
item No.
U000 Detail of event log
No. Items
(1) System version
(2) System date
(3) Paper Jam Log
1-3-6
Description
# Count.
Remembers 1 to 16 of The total page count at
occurrence. If the the time of the paper
occurrence of the previ- jam.
ous paper jam is less
than 16, all of the paper
jams are logged. When
the occurrence
excesseds 16, the old-
est occurrence is
removed.
(a) Cause of paper jam (Hexadecimal)
04: Cover open
05: Secondary paper feed does not start
10: No paper feed from cassette 1
11: No paper feed from cassette 2
12: No paper feed from optional cassette 3
13: No paper feed from optional cassette 4
14: No paper feed from MP tray
18: Misfeed in vertical paper conveying section
19: Misfeed in paper feeder vertical paper conveying section
20: Misfeed in MP tray paper conveying section
21: Multiple sheets in paper feed section
23: Multiple sheets in MP tray conveying section
30: Misfeed in registration/transfer section
40: Misfeed in fuser section (MP tray)
41: Misfeed in fuser section (cassette 1)
42: Misfeed in fuser section (cassette 2)
43: Misfeed in fuser section (optional cassette 3)
44: Misfeed in fuser section (optional cassette 4)
47: Misfeed in fuser section (duplex section)
50: Misfeed in eject section
51: Misfeed in job separator eject section
52: Misfeed in feedshift section
60: Duplex paper conveying section 1
61: Duplex paper conveying section 2
70: No original feed
71: An original jam in the original conveying section 1
72: An original jam in the original conveying section 2
73: An original jam in the original switchback section
74: An original jam in the original switchback/feed section
75: An original jam in the original switchback/conveying section
78: Document processor cover open
80: Jam between the finisher and machine (built-in finisher)
81: Paper entry sensor nonarrival jam
82: Jam in stapler
83: Exit sensor stay jam
91: Finisher cover open
92: Exit sensor non-arrival jam (document finisher)
93: Reverse sensor jam (document finisher)
94: Paper entry sensor stay/remaining jam (document finisher)
95: Paper conveying sensor jam (document finisher)
96: Jam between the built-in finisher and machine (built-in finisher)
Description
Event
Log code (2 digit, hexa-
decimal, 5 categories)
(a) Cause of a paper
jam
(b) Paper source
(c) Paper size
(d) Paper type
(e) Paper eject