Advertisement
Use the transmitter buttons as illustrated to adjust the features required. Keep re-pressing the transmitter button that
relates to the feature you want to adjust until the correct amount of chirps/beeps is heard. Move on to the next feature.
One LED Pulse
Button
(Factory Default
Gasoline Engine
Diesel Engine with
+
Wait-To-Start Light
(White/Green wire must
be connected)
10 min. Run Time
Factory Alarm Disarm
with Channel 3 On
Constant Parking
Light Output
Door Lock Before Start
Press
+
to Activate Remote Start
Fahrenheit Display
+
for Temperature
Temperature Control
+
Starting OFF
Step 4
Remote Start Feature Programming
One Chirp
LED Two Pulses
Setting)
Diesel Engine without
Wait-To-Start Light
Warm Up Timer
20 min. Run Time
Without this Feature
Flashing Output
After Shutdown
-
Button
Press
to Activate Remote Start
for Temperature
Temperature Control
Starting 5° F (-15° C)
Turn On the Ignition
3 long chirps & 3 flashes of the parking lights will confirm exit
of the programming mode.
ON
Note: Waiting 15 seconds after the last command will also
cause the system to automatically exit the programming mode.
Step 3
Two Chirps
LED Three Pulses
Diesel Engine without
Wait-To-Start Light
10 Second
Parking Light
Door Lock Before Start
Door Lock
+
Button
to Activate Remote Start
Celsius Display
Temperature Control
Starting 4° F (-20° C)
Three Chirps
Diesel Engine without
15 Second
Warm Up Timer
30 min. Run Time
and Door Lock
After Shut Down
Press
Button
Starting 22° F (-30° C)
Four Chirps
LED Four Pulses
Wait-To-Start Light
20 Second
Warm Up Timer
5 min. Run Time
Without This Feature
Temperature Control
21
Advertisement
