Omron TJ1/GRT1 Hardware Reference Manual page 61

Hardware reference
1. Strip the wires.
2. To make it easier to insert the wires, twist them.
3. If necessary, crimp the plain (top) ferrules or the collared (bottom)
ferrules.
4. Insert the screwdriver into the inner (square) hole. Push firmly.
5. Insert the wire into the outer (circular) hole.
6. Remove the screwdriver.
7. Make sure that there are no loose strands.
Wiring specifications
/i
Item Specification
2
Wire types 0.14−1.0 mm
Solid, stranded or stranded with ferrule:
• Crimp ferrules according to DIN46228/1
• Crimp ferrules wit plastic collar according to DIN46228/4
• With recommended tool Weidmüller PZ6
Insertion tool 2.5 mm flat-bladed screwdriver
Recommended Weidmüller
ferrule types AEH H0,14/12
AEH H0,25/12
AEH H0,34/12
7 mm without ferrules (tolerance: +1 mm, −0 mm)
Stripping length
10 mm with ferrules (tolerance: +1 mm, −0 mm)
Conductor size
/i
Item Specification
Clamping range 0.08−1.0 mm
Wires without ferrule 0.5−1.0 mm
Wires with ferrule AEH H0,14/12, 0.13 mm
AEH H0,25/12, 0.25 mm
AEH H0,34/12, 0.34 mm
HARDWARE REFERENCE MANUAL
2
2
2
2
2
fig. 17
56