Battery Level Indicator; Operation From Ground With Controller - Terex Genie GS-1932 XH Operator's Manual

Operator's Manual
Operating Instructions
Tilt Sensor Activation Settings
Tilt Sensor Activation Settings
Chassis Angle (side to side)
Chassis Angle (front to back)
If the tilt alarm sounds while
raising the platform, lower the
platform and move the machine to
a firm, level surface. If the tilt alarm
sounds when the platform is
raised, use extreme caution to
lower the platform.
When the platform controls LED
readout displays LL, the ground
controls LCD displays LL: Machine
Tilted, and the tilt alarm sounds at
180 beeps per minute, the
following functions are affected:
drive, steer, and elevate functions
are disabled.
Return the machine to level ground to restore lift
functions.
Operation from Ground with
Controller
Maintain safe distances between the operator,
machine and fixed objects.
Be aware of the direction the machine will travel
when using the controller.
76

Battery Level Indicator

Use the LED diagnostic readout to determine the
battery level.
1.5°
3°
Note: When a blinking LO code appears on the
platform controls LED display, the machine must
be taken out of service and charged, otherwise all
machine functions will be disabled.
™ ™
GS -30 • GS -32 • GS
Eighth Edition • Second Printing
™
-46
Full Charge
Half Charge
Low Charge
LO Flashing
Part No. 1296776GT