Ford Msg-425 Engine Fault Codes - Terex GS90D-4695 Service And Repair Manual

December 2023
Ford bell housing bolt torque sequence
Deutz, Weichai bell housing bolt torque sequence
7 Deutz, Weichai models: Torque the bell
housing mounting bolts labeled "C" in
sequence to 40 ft-lbs / 54 Nm.
Ford models: Torque the bell housing
mounting bolts labeled "A" and "B" in
sequence to 40 ft-lbs / 54 Nm and the
mounting bolts labeled "C" to 70 ft-lbs / 95
Nm.
8 Ford models: Install the air cleaner mount
bracket onto the bell housing. Install the
fasteners and torque to 28 ft-lbs / 38 Nm.
Part No. 1325652GT
4-3
Engine Fault Codes -
Ford MSG-425 Models
How to Retrieve Engine Fault
Codes
The ECM constantly monitors the engine by the
use of sensors on the engine. The ECM also uses
signals from the sensors to initiate sequential fuel
injection and make constant and instantaneous
changes to ignition timing, fuel delivery and throttle
position to maintain the engine's running condition
at its highest efficiency while at the same time
keeping exhaust emissions to a minimum. When a
sensor fails or returns signals that are outside of
set parameters, the ECM will store a fault code in
memory that relates to the appropriate sensor and
will turn on the Check Engine Light.
Refer to Fault Code Section, How to Retrieve Ford
Engine Fault Codes. Use the Fault Code Chart to
aid in identifying the fault.
GS -3390 • GS -4390 • GS
™ ™
Service and Repair Manual
-5390
™
Engines
55