Soft-Reboot The Unit From The Http Interface - Comtech EF Data UT-4579 Installation And Operation Manual

UT-4579 X-Band Up Converter
Firmware Update
2. Verify the new firmware version has booted; for example, check the
firmware version displayed on the UT-4579 front panel:
UT_4579–X
SW VER X.X.X

5.4.4.2.2 Soft-Reboot the Unit from the HTTP Interface

Do these steps from the HTTP Interface 'Config | Utility' page:
1. In the 'Perform Soft Reboot' section, click [Reboot Now]:
2. Wait while the UT-4579 reboots with the Current Active Firmware Image.
3. To load a second image, repeat the tasks described throughout Section
5.4.4.
The UT-4579 is now operating with its latest firmware. The firmware update
process is complete.
SN#########
5–15
MN/UT4579.IOM
Revision 1