Unit Connectors - Comtech EF Data UT-4579 Installation And Operation Manual

UT-4579 X-Band Up Converter
Front and Rear Panel Connectors

4.2 Unit Connectors

External cables are attached to connectors provided on the rear and front panels
of the unit (Figure 4-5).
The UT-4579 chassis, as initially released (Figure 4-6), does not provide
an 'Ethernet' RJ-45 port. Ethernet interface operation is not available on
these legacy products.
(TOP) Rear Panel with Optional -48V DC Power Interface
(CENTER) Rear Panel with Standard AC Power Interface (with TSM)
Figure 4-5. Rear and Front Panels (Current Production Chassis shown)
Figure 4-6. Rear Panel – Initially Released Chassis (OBSOLETE) (with TSM)
(BOTTOM) Front Panel
4–7
MN/UT4579.IOM
Revision 1