Dt-45Xx Common Mib File; Dt-45Xx Traps Mib File; Snmp Community Strings - Comtech EF Data UT-4579 Installation And Operation Manual

X-band up converter

Table of Contents

UT-4579 X-Band Up Converter

Ethernet Interface Operation

o OID: 1.3.6.1.4.1.6247

o Full path: iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).

comtechEFData(6247)

o Module: ComtechEFData

7.2.1.2 DT-45xx Common MIB File

• FW-0020205x.mib

• MIB file consists of all of the OID's for management of the unit functions.

• FW-0020206x.mib

• Trap MIB file provides SNMPv1 traps common for the unit.

CAUTION

In SNMP v1/v2, the SNMP Community String is sent unencrypted in the

SNMP packets. Caution must be taken by the network administrator to

ensure that SNMP packets travel only over a secure and private network

if security is a concern.

For correct SNMP operation, the converter MIB files must be used with

the associated version of the unit M&C. See the DT-45xx FW Release

Notes for information on the required FW/SW compatibility.

The UT-4579 uses Community Strings as a password scheme that provides

authentication before gaining access to the router agent's MIBs. They are used

to authenticate users and determine access privileges to the SNMP agent. The

UT-4579 defines three Community Strings for SNMP access:

• Read Community

• Write Community

• Trap Community

Type the SNMP Community String into the user-supplied MIB Browser or

Network Node Management software.

default = public

default = private

default = comtech

7–3

MN/UT4579.IOM

Revision 1

Table of Contents