Switching off the ADC Compact Plus
Before switching off
Check that the ADC Compact Plus is not scanning an image plate. If the ADC
Compact Plus is scanning an image plate, the status indicator at the top of
the machine is green and flashing.
Switching off
It is recommended to switch off the ADC Compact Plus at the end of the day.
Only switch off the ADC Compact Plus if you do not intend to digitize
emergency image plates overnight. Switching on the ADC Compact Plus
takes a few minutes. During this time emergency digitizing is not
possible!
Place the main switch in position 'OFF'.
2231C EN 20040224
23