Re-erasing image plates with status 'erased'
To erase one or more image plates which have been erased as part of a
normal or emergency digitizing cycle:
1
Check that the ADC Compact Plus is ready for operation:
•
the ADC Compact Plus must display the operator screen with 'Ready' or 'Busy'
status.
ADC COMPACT PLUS
•
the status indicator at the top of the ADC Compact Plus must be constant or
flashing green.
2
Press the Erase key on the keypad.
The display will read:
The next cassette(s) will be erased
Enter number of cassettes to erase: #
Put cassette(s) in input buffer or
press
to quit.
2231C EN 20040224
ERASURE
WARNING
READY
READY
Status
33