AGFA ADC Compact Plus User Manual page 48

Status
Plate jam in the post-scan unit.
1
Image is OK.
Plate jam in the pre-scan unit.
Image plate is not erased but
2
cassette status is set to 'erased'.
Plate jam in the scanner. Cassette
status is set to 'erased'. Image is
3
damaged.
To clear an image plate jam:
1
Remove the cassette.
Refer to 'Clearing cassette jams'
2
Check whether the image plate is jammed in the pre-scan or in the post-scan
unit.
Refer to the diagram above.
•
If the image plate is jammed in the pre-scan unit, continue with step 3.
•
If the image plate is jammed in the post-scan unit, continue with step 4.
48
Action
Erase the image plate.
1
Re-identify cassette via ID
Station.
2
Digitize cassette.
1
Erase the image plate.
2
Redo the patient exam.
on page 43.
2231C EN 20040224