Resetting the ADC Compact Plus
In exceptional circumstances you may be prompted to reset the ADC
Compact Plus - either by a message on the keypad or as part of a
troubleshooting procedure in this manual.
Never reset the Digitizer to solve a plate or cassette jam. If you would do
so, the plate inside the Digitizer might get damaged. In case of a plate or
cassette jam, always follow the procedures described in Chapter 4 ,
'Preventive maintenance and troubleshooting' of the Reference manual.
To reset the Digitizer:
1
Locate the main switch and place it in position 'OFF'.
2
Wait 30 seconds.
3
Place the main switch in position 'ON'.
24
2231C EN 20040224