AGFA ADC Compact Plus User Manual page 34

3
Use the Up and Down keys to set the number of image plates to be erased.
The default value is 1; the maximum is 9.
4
Place the cassettes which you want to erase in the cassette input buffer.
After a cassette has been erased, the # digit on the display decreases.
While erasing, the ADC Compact Plus will still display the above screen and the
status indicator will be green flashing. When the ADC Compact Plus has erased the
image plate, it displays the operator main screen.
You can now add (exposed) cassettes to the batch of cassettes. The Digitizer will
only erase as many cassettes as you have specified.
If you place fewer cassettes in the cassette input buffer than you have specified, the
Digitizer will erase the cassettes in the buffer and revert to normal mode after a
time-out of 1 minute.
You can quit the Erase function by either pressing Escape or by pressing the Erase
key a second time ('toggle' key).
34
2231C EN 20040224