AGFA ADC Compact Plus User Manual page 20

The status indicator
The light at the top of the ADC Compact Plus indicates the status of the ADC
Compact Plus.
Constant/
Color
Flashing
Constant
Green
Flashing
Constant
Red
Flashing
Audio signals
The ADC Compact Plus gives status information via beeps. The length of the
beep indicates the response of the system to a key command.
•
A short beep means that ADC Compact Plus has accepted the key command
and is starting the operation.
•
A long beep means that you have pressed a non-active key or that the ADC
Compact Plus has rejected the key command.
•
An interval beep accompanies an error, locked or warning message.
20
Status
Ready.
Busy (treating image
plate).
Error.
• Locked or warning.
• Power on/self-test
in progress.
• Key-operator mode.
• Service mode.
• ADC Compact Plus
not connected to
image processing
device.
Action
Proceed.
Proceed.
• Check display for messages.
• Refer to 'General procedure
in case of malfunction'
page 41.
• Check display for messages.
• Refer to 'General procedure
in case of malfunction'
page 41.
on
on
2231C EN 20040224