AGFA ADC Compact Plus User Manual page 22

After the Digitizer has been switched on, the following screen is displayed:
The ADC Compact Plus executes a self-test, initializes all the Digitizer components,
goes through a start-up procedure and checks for cassettes, image plates and
images still to be transmitted in the image queue. During this stage, the status
indicator is red and flashing.
If the ADC Compact Plus has completed the self-test successfully, the ADC
Compact Plus enters the operator mode and displays the main operator screen:
ADC COMPACT PLUS
The status indicator is constant green. The ADC Compact Plus is ready for use.
# If the ADC Compact Plus displays:
An error has occurred during the self-test. Refer to
operation ('Key-operator
22
WAIT
Self test proceeding
ERROR
Self test failed
mode')'.
READY
SERVICE XXXXX
Chapter 3, 'Advanced
2231C EN 20040224