CTP150 Platform Hardware Documentation
CTP150 Console Cable Pinouts
Table 10: CTP150 Series Console Cable Pinouts
CTP RJ-45 Pin
1 RTS
2 DTR
3 TXD
4 GND
5 GND
6 RXD
7 DSR
8 CTS
Related
30
The console connector to the CTP150 platform is a standard RJ-45 to DB-9 adapter
cable.
Figure 6 on page 30
device. On the left is the RJ-45 connector, and on the right is the DB-9 connector with
the pin numbering indicated.
The console connections are configured to the following parameters:
Speed: 9600 bps
Data bits: 8
Stop bits: 1
Flow control: Xon/Xoff
Parity: none
Figure 6: CTP150 Console Cable Pin Configurations
Table 10 on page 30
lists console cable pinouts for the CTP150 device based on the pin
configurations.
Console DB-9 Pin
8 CTS
6 DSR
2 RXD
5 GND
5 GND
3 TXD
4 DTR
7 RTS
CTP Fast Ethernet and Power Cables on page 31
displays the console cable pin configurations for CTP150
Copyright © 2015, Juniper Networks, Inc.