CHAPTER 5
Equipment Rack Requirements
CTP150 Rack Requirements
Related
Documentation
CTP150 Mechanical Requirements
Copyright © 2015, Juniper Networks, Inc.
CTP150 Rack Requirements on page 19
CTP150 Mechanical Requirements on page 19
CTP150 Space Requirements on page 20
CTP150 Rack Installation on page 20
CTP Cabling Recommendations on page 20
When allocating equipment rack space, consider the following:
Type of equipment racks recommended for the system
Number of equipment racks required to hold your current system configuration
Future expansion
Make sure that your distribution rack meets basic mechanical and space requirements
and complies with conventional standards. In the United States, use EIA-310-D Cabinets,
Racks, Panels, and Associated Equipment, September 1992.
CTP150 Mechanical Requirements on page 19
CTP150 Space Requirements on page 20
CTP150 Rack Installation on page 20
Follow these mechanical requirements for your rack:
Select from the following rack options:
Two-post rack—a freestanding enclosed cabinet with two mounting posts in the
front
Telco-type rack—two adjacent mounting posts that you must secure to the floor or
an overhead structure
19