Table of Contents
Advertisement
CTP1000 Console Cable Pinouts
Table 8: CTP1000 Series Console Cable Pinouts
CTP DB-9 Pin
2 RCV
3 XMT
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
9 RNG
Related
Documentation
CTP Fast Ethernet and Power Cables
Fast Ethernet Cables
DC Power Cables
Copyright © 2015, Juniper Networks, Inc.
A console is connected to the CTP1002, CTP1004, and CTP1012 devices with a DB-9
crossover cable. The console connections are configured to the following parameters:
Speed: 9600 bps
Data bits: 8
Stop bits: 1
Flow control: Xon/Xoff
Parity: none
Table 8 on page 29
lists console cable pinouts for CTP1000 devices.
Console DB-9 Pin
3 XMT
2 RCV
6 DSR
5 GND
4 DTR
8 CTS
7 RTS
—
CTP Fast Ethernet and Power Cables on page 29
Fast Ethernet Cables on page 29
DC Power Cables on page 29
The Ethernet connection is a standard RJ-45 connector. Typically, a straight-through
cable is used to connect to a switch, and a crossover cable is used to connect to a router.
For CTP chassis with DC power options, we recommend 18-AWG power cables.
Chapter 5: Cable and Pinout Specifications
29
Advertisement
Table of Contents
Troubleshooting
