Inspecting Platform Components And Accessories; If You Detect Or Suspect Damage - Juniper CTP150 Manual

CTP150 Platform Hardware Documentation
Related
Documentation

Inspecting Platform Components and Accessories

Related
Documentation

If You Detect or Suspect Damage

Related
Documentation
48
To unpack the device:
Cut the two straps that secure the carton to the skid, open the carton from the top,
1.
and remove the box of accessories that sits on top of the device.
Unlock the four plastic clips that hold the box to the skid by squeezing them in their
2.
center and pulling out, and then lift the carton off the device.
Remove the three screws that attach each of the two L-brackets to the device.
3.
To avoid scratching the device when removing it from the skid, detach one of the
4.
L-brackets from the skid by removing the three screws.
Before You Unpack the CTP Platform on page 47
Inspecting Platform Components and Accessories on page 48
If You Detect or Suspect Damage on page 48
Contacting Juniper Networks on page 49
After you remove the equipment from the shipping containers:
Confirm the contents of each container.
Inspect all external surfaces and external connectors for visible signs of damage.
Inspect all accessories shipped with each unit.
Document any damage noted during your inspection.
Confirm that the platform has the correct number and type of modules for your ordered
configuration.
Before You Unpack the CTP Platform on page 47
Unpacking the CTP Device on page 47
If You Detect or Suspect Damage on page 48
Contacting Juniper Networks on page 49
If you detect or suspect damage to any equipment:
Contact the shipper responsible for delivery, and formally report the damage.
Contact your Juniper Networks sales representative or reseller.
Before You Unpack the CTP Platform on page 47
Unpacking the CTP Device on page 47
Copyright © 2015, Juniper Networks, Inc.