Equipment Rack Requirements; Ctp1000 Rack Requirements; Ctp1000 Mechanical Requirements - Juniper CTP1000 Series Hardware Manual

Circuit to packet platforms

Hide thumbs Also See for CTP1000 Series:

Table of Contents

CHAPTER 4

Equipment Rack Requirements

Documentation

CTP1000 Rack Requirements on page 21

CTP1000 Mechanical Requirements on page 21

CTP1000 Space Requirements on page 22

CTP1000 Rack Installation on page 22

CTP Cabling Recommendations on page 22

When allocating equipment rack space, consider the following:

Type of equipment racks recommended for the system

Number of equipment racks required to hold your current system configuration

Future expansion

Make sure that your distribution rack meets basic mechanical and space requirements

and complies with conventional standards. In the United States, use EIA-310-D Cabinets,

Racks, Panels, and Associated Equipment, September 1992.

CTP1000 Mechanical Requirements on page 21

CTP1000 Space Requirements on page 22

CTP1000 Rack Installation on page 22

Follow these mechanical requirements for your rack:

Select from the following rack options:

Two-post rack—A freestanding enclosed cabinet with two mounting posts in the

front

Telco-type rack—Two adjacent mounting posts that you must secure to the floor or

an overhead structure

Table of Contents

Ctp1002 Ctp1004 Ctp1012