Siemens SIMATIC ET 200M Operating Instructions Manual page 38

Assignment planning
3.3 Configuration possibilities for PROFIBUS DP
Parameter assignment / operation of HART field devices
The following is required for the parameter assignment / operation of HART field devices:
• EDD (for ET 200M) Version V1.1.8 or higher
EDD (Electronic Device Description) is required to set up HART field devices. It is included
on the PDM Device Library CD (as of Edition 2, dated 2007) supplied with PDM.
• PDM V6.0 SP3
Note
If an older PDM version is used together with the EDD indicated above, an error message
is not issued.
However, then HART field devices on HART input/output modules that plug into slots 12
to 15 cannot be operated.
38
Operating Instructions, 04/2022, EWA-4NEB7806006-09
ET 200M