Siemens SIMATIC ET 200M Operating Instructions Manual page 76

Connecting
5.3 Connecting PROFINET IO
Installing the PROFINET cable connector
Install the PROFINET connector according to the specifications in the "PROFINET installation
guideline (http://www.profibus.com/pall/meta/downloads/article/00328/)".
For more information, refer to the "PROFINET Cabling and Interconnection Technology
(http://www.profibus.com/pall/meta/downloads/article/00327/)" manual.
Pin assignment of the RJ45 connector
View of the RJ45 socket
Installing the cable holder
Install the supplied cable holder (see figure above).
1. Open the front door of the IM 153-4 PN interface module.
2. Insert the cable holder into the prepared cutout on the interface module.
3. Screw the cable holder firmly into place.
76
Terminal Assignment
1 RD (Receive Data +)
2 RD_N (Receive Data –)
3 TD (Transmit Data +)
4 Ground
5 Ground
6 TD_N (Transmit Data –)
7 Ground
8 Ground
Operating Instructions, 04/2022, EWA-4NEB7806006-09
ET 200M