Siemens SIMATIC ET 200M Operating Instructions Manual page 250

Order Numbers for the ET 200M
Manual
"System and Standard Functions for S7-300/400
(http://support.automation.siemens.com/WW/view/e
n/1214574)"
"Communication with SIMATIC
(http://support.automation.siemens.com/WW/view/e
n/25074283)"
"SIMATIC NET PROFIBUS networks
(http://support.automation.siemens.com/WW/view/e
n/1971286)"
Configuration manuals
(http://support.automation.siemens.com/WW/view/e
n/10806846/133300)
"S7-300 automation system, ET 200M distributed I/O
device, fail-safe signal modules
(http://support.automation.siemens.com/WW/view/e
n/19026151)"
FM 35x manual
(http://support.automation.siemens.com/WW/view/e
n/10805177/133300)
Manual for the ET 200 in SIMATIC S5
In order to program and commission an ET 200M with COM PROFIBUS you require the
following manual with the order number 6ES5998-3ESx2.
Table B- 3 Manual for the ET 200 in SIMATIC S5
Manual
"ET 200 Distributed I/O
System
(http://support.automatio
n.siemens.com/WW/view/
en/1142470)"
"COM PROFIBUS
(http://support.automatio
n.siemens.com/WW/view/
en/1498610)"
250
Contents
• Description of the master switching of the IM 308-C for S5-115U, S5-135U and S5-155U
• Description of the S5-95U with PROFIBUS DP master interface
• Handling the FB IM308C
• Handling COM PROFIBUS
Electronic manual on CD-ROM and constituent of the COM PROFIBUS (as of version 5.x)
Contents
Description of the SFCs in STEP 7
Introduction to the communication options in SIMATIC
• Introduction to PROFIBUS networks
• Network configuration
• Components for PROFIBUS networks
• Introduction to the PCS 7 system philosophy
• Description of the configuration of a system with PCS 7
Description and technical data of the S7-300 I/O modules in the in-
trinsically safe area
Description and technical data of the function modules FM 35x (a
separate manual for each FM)
Operating Instructions, 04/2022, EWA-4NEB7806006-09
ET 200M