Block Parameter With Its Default Assignment And Short Comment - Siemens SIPLUS RIC IEC on S7 Manual

3.1.1.2. Block parameter with its default assignment and short comment

FB161
Comp_ID
Para_Image_DB
max_No_of_Images
P_Application_Src
ASDU_Adr_Src
First_Info_Adr_Src
Last_Info_Adr_Src
Filt_15_13_11_9_7_5_3_
1
P_SLi
Tx_Prio_L
Tx_Prio_H
Pri-
oH_15_13_11_9_7_5_3_
1
wTime_15_13_11_9_7_5
_3_1
Inro_QOI
IC_15_13_11_9_7_5_3_
1
TwoC_15_13_11_9_7_5
_3_1
Threshold_Val_ME
FB_RetVal
IM_DB_No
No_used_IMs
New_Image
SIPLUS RIC IEC on S7 V1.5
Functional description
Type Default
IN BYTE B#16#0
IN INT 0
IN INT 256
IN DWORD DW#16#0
IN DINT L#65535
IN DINT L#1
IN DINT L#16777215
IN BYTE B#16#FF
IN DWORD DW#16#0
IN INT 1
IN INT 0
IN BYTE B#16#8F
IN BYTE B#16#FF
IN BYTE B#16#14
IN BYTE B#16#7F
IN BYTE B#16#0
IN Real 0.0
OUT WORD W#16#0
OUT INT 0
OUT INT 0
OUT BOOL FALSE
Page 12 of 28
Block-comment / short description
Identifier for Diagnostic-Functions
Number of a para-/image-DB; with 0 a DB will
be created at runtime
Default: 256; dimension of dynamic generated
data block for the images
Pointer which has to
'S7_IEC_Config' - Module (Source of info)
Default: 65535=FFFFh -> All;
Default: 1
Default: max=16777215=FFFFFFh;
TI-Filter for IT/MEC/MEB/MEA/BO/ST/DP/SP:
Def: all TIs are forwarded (B#16#FF)
must be connected
SL_Org_ASDU - Module
Priority of transmission with Prio L: 0 (highest) -
15 (lowest) Default = 1
Priority of transmission with Prio H: 0 (highest) -
15 (lowest) Default = 0
Priority for transmission: 0: Low, 1: High / De-
fault = B#16#8F (MEs=Prio Low)
Transmission with(1) or without(0) Timestamp if
COT<20(requested);Def = B#16#FF
0: No Reaction; 20 (=14hex,default) General
interrogation; 21-36 -> Group 1-16
active. TIs will be transmitted within an interro-
gation; Default: B#16#7F
active. TIs will be forwarded without change of
val/state, if rcv. COT<20. Def:0;
0.0 without (def), >0: Threshold value (digits) for
forwarding of measured val.
positive Values -> ok;
(16#8xxx) -> Error
DB number for the internal process image, cre-
ated by this module
Number of information, actually placed in the
image data block
Signals that the number of Images has been
increased within this cycle
I IA CE
be connected to
with P_to_SLi from
negative Values
©SIEMENS AG 2013