Siemens SIMATIC ET 200M Operating Instructions Manual page 75

Requirements
Wire the interface module with the supply voltage switched off.
Required tools
• Screwdriver with 3 mm blade
• Cross-tip screwdriver, size 1
• Industrial Ethernet Fast Connect stripping tool (6GK1901-1GA00)
(stripping tool for Industrial Ethernet Fast Connect installation cables)
Required accessories
• Cable with maximum 2.5 mm
• PROFINET connector according to the specifications in the "PROFINET installation guideline
(http://www.profibus.com/pall/meta/downloads/article/00328/)".
The following are suitable:
PROFINET RJ45 connector with
Fast Connect connection system, 180°
cable outlet
• Industrial Ethernet Fast Connect installation cables
The following are suitable:
Fast Connect standard cable
Fast Connect trailing cable
Fast Connect marine cable
ET 200M
Operating Instructions, 04/2022, EWA-4NEB7806006-09
conductor cross section for the supply voltage
2
6GK1901-1BB10-2AA0
6XV1840-2AH10
6XV1840-3AH10
6XV1840-4AH10
Connecting
5.3 Connecting PROFINET IO
75