Table of Contents
Advertisement
7.1.11
Firmware of the device
7.1.11.1
Firmware settings
You can save the firmware settings of a device to a file. This step saves the basic settings of a
device so that you can restore the basic status of the firmware settings after inadvertent or
incorrect changes.
You can also transfer firmware settings from one computer to another if the hardware
platform and the firmware version match. This will give you the option to save the firmware
settings of a computer as a template.
Note
The following functions vary according to the device and are not available on all SIMATIC IPC
models.
Saving current firmware settings
1. Start the Management Explorer.
2. In the menu bar, select "Tools > Local BIOS...".
3. Select the "Settings" tab.
4. Click the "Save" button.
5. Select the storage location and enter a suitable file name.
6. Confirm the selection.
Loading firmware settings
1. Start the Management Explorer.
2. In the menu bar, select "Tools > Local BIOS...".
3. Select the "Settings" tab.
4. Click the "Load" button.
5. Select the file you want to upload.
6. Confirm the selection.
7. Activate the newly loaded firmware settings by restarting the PC.
Displaying current firmware settings
1. Start the Management Explorer.
2. In the menu bar, select "Tools > Local BIOS...".
The current firmware settings are shown in the "Settings" tab.
SIMATIC IPC DiagMonitor V5.1.6
Operating Manual, 05/2021, A5E50981422-AA
Configuration
7.1 Management Explorer
45
Advertisement
Table of Contents
