Commissioning The Device And Device Functions; General Information On Commissioning - Siemens SIMATIC IPC277G PRO Operating Instructions Manual

Commissioning the device and device functions

4.1

General information on commissioning

Danger of burns
The surface of the device can reach temperatures of over 65 °C. Any unprotected contact
may cause burns.
Avoid direct contact during operation of the device. Touch the device only with appropriate
protective gloves.
Note
Configuring memory cards in the device
Memory cards used in a device need to be configured on that device. Memory cards
configured on other devices will not boot as the drive parameters will be different.
TFT displays
NOTICE
Burn-in effect and backlighting
The brightness of the backlighting deteriorates over the course of the screen's service life. A
permanent picture with bright screen objects leads to a burn-in effect.
• Use a screen saver to extend the life of the screen and the backlighting and to prevent
Notes on operation
Note
During the boot process...
• Make sure that there are no conductive liquids on the touch screen during startup.
• Do not touch the touch screen during startup.
The device automatically calibrates the touch screen during startup.
SIMATIC IPC277G PRO
Operating Instructions, 02/2022, A5E51373692-AA
CAUTION
the burn-in effect.
4
45