Table of Contents
Advertisement
Introduction
Even in their basic versions, SIMATIC Industry PCs come with optional monitoring functions.
When used in combination with the appropriate software, the following functions for
displaying, monitoring and controlling are available:
• Temperature monitoring (over-temperature, under-temperature or cable break at a
temperature sensor)
• Fan monitoring (fan speed too low, fan failure, or a break in a tachometer line)
• Monitoring of the battery level
• Monitoring of hard disks with S.M.A.R.T functionality even in a RAID system
• Watchdog (hardware or software reset of the computer)
• Operating hours meter (information on the cumulative run time)
With the SIMATIC IPC DiagMonitor software, you can use these functions for local and remote
monitoring. You can use the DiagMonitor Management Explorer application for general
monitoring or DiagMonitor Alarm Manager for notification of individual alarms.
This documentation describes the functionality of SIMATIC IPC DiagMonitor software.
6
SIMATIC IPC DiagMonitor V5.1.6
Operating Manual, 05/2021, A5E50981422-AA
1
Advertisement
Table of Contents
