Table of Contents
Advertisement
6.3
Alarm Manager
6.3.1
The Alarm Manager in the system tray
If the Alarm Manager has been started, an icon appears in the system tray. There are three
different representations depending on the status:
• Connection established, no alarm
connection was established to the monitored devices. There are currently no problems to
report.
• Connection established, alarm
has been detected. When the alarm is cleared, the icon changes back to a DiagMonitor
icon
• Could not establish connection to at least one station
stations that have been successfully connected are reported. Ensure that the stations
meet the requirements (Page 9) of the SIMATIC IPC DiagMonitor software.
6.3.2
Starting the Alarm Manager from the Management Explorer
The Alarm Manager can be called directly from the Management Explorer either to restart it
or to change the settings. To open the Alarm Manager, select "Tools > Alarm Manager" in the
Management Explorer menu.
SIMATIC IPC DiagMonitor V5.1.6
Operating Manual, 05/2021, A5E50981422-AA
.
Displaying operating data and alarms
: The Alarm Manager is working correctly, a
: The Alarm Manager is working correctly, a problem
: In this state, only alarms from
6.3 Alarm Manager
27
Advertisement
Table of Contents
