Table of Contents
Advertisement
7.2.4
Removing an application in the Alarm Manager
If you want to remove an application, follow these steps:
1. Select the required application.
2. Click the "Remove" button.
3. Confirm the "Delete entry?" prompt in the dialog with "Yes".
7.2.5
Changing settings of the Alarm Manager
Proceed as follows to make general settings of the Alarm Manager:
1. You can do this by right-clicking on the Alarm Manager icon in the system tray.
2. Select "Settings..."
3. Change to the "Options" tab. Here, you can then make the following settings:
– Acoustic alarm signal:
– Event logging:
– Autostart:
SIMATIC IPC DiagMonitor V5.1.6
Operating Manual, 05/2021, A5E50981422-AA
An acoustic alarm can be output via the sound card.
Events can be logged. Activate this function to save events in the event view.
Refer to Displaying events with the Event Viewer (Page 28).
Specifies whether or not the Alarm Manager opens automatically when you start
Windows.
Configuration
7.2 Alarm Manager
49
Advertisement
Table of Contents
