Displaying The Properties Of An Element; The "Properties; Selecting The View - Siemens SIMATIC IPC DiagMonitor V5.1.6 Operating Manual

Displaying operating data and alarms
6.1 The Management Explorer
6.1.3.3

Displaying the properties of an element

To display the properties of an element, follow these steps:
1. Right-click on the element in the list view.
2. Select the menu command "Properties" from the shortcut menu.
3. The "Element properties..." window opens and displays the main properties of the element.
6.1.3.4 The "Properties..." Window
This window displays the main properties of a selected station, group or element.
Special features of groups:
• Sensors: For fans or temperatures, the current value and the low and high limit value are
displayed.
• Displays: For LEDs and optional 7-segment displays, you can link an alarm with an element
in the "Alarm mapping" tab. See Mapping an alarm to a display (Page 26).
• Watchdog: You can set a timeout value and options for watchdog operation. See
Configuring the watchdog (Page 30).
• Station: A station description can be stored.
• Hard disks: Limits can be defined for the free space of the partitions.
6.1.4

Selecting the view

In the right-hand pane of the program window of the DiagMonitor Management Explorer,
you can choose between three different representations. You can select these via the menu
item "View".
The following views are available:
• Tiles: The elements of the sensors, for example fans or temperatures are shown in the list
view graphically in the form of a scale. The values to the left of the scale show the
permitted high and low limits. The value below the scale is the current value. To the right
of the scale, there are two pointers. These indicate the maximum or minimum value
measured up to now. To reset the max/min pointers to the current value, right-click on the
required element in the list view. Select "Reset interval values"
• Icons: This view displays large icons and brief status information about the monitored
devices.
• Details: This view displays small icons and detailed status information about the
monitored devices.
Example of a fan: In the detailed view, apart from the type and current value, you can also
see the low and high limit of the fan speed.
18
SIMATIC IPC DiagMonitor V5.1.6
Operating Manual, 05/2021, A5E50981422-AA