Table of Contents
Advertisement
Installation
5.1
Installing the device
5.1
Possible areas of installation
The device may be installed in control desks, switching cabinets and 19`` rack systems, both
horizontally and vertically.
Possible mounting methods
Options of mounting the device
• Mounting on angle brackets
• Installation on device bases
• Tower installation: a separate tower kit can be ordered for tower installation.
• Installing with telescopic rails
When telescopic rails are used, the devices can be completely removed from the cabinet
or rack.
Refer to the sections "Technical data of the telescopic rails" and "Dimensional drawing for
the use of telescopic rails" for more detailed information.
Position of the mounting holes (1) for angle brackets or telescopic rails
Caution
The mounting screws of the telescopic rails may not protrude into the enclosure by more
than 5 mm.
SIMATIC Rack PC IL 43
Operating Instructions, Edition 09/2005, A5E00432875-01
5
5-1
Advertisement
Table of Contents
