Table of Contents
Advertisement
6.3.5
Start Alarm Manager
After installation, the Alarm Manager is configured so that the application is started
automatically when the system starts up. You disable this feature as follows:
1. You can do this by right-clicking on the Alarm Manager icon in the system tray.
2. Select the menu command "Settings..." from the shortcut menu.
3. Select the functions under "Autostart" in the "Options" tab.
4. The Alarm Manager can continue to be started manually via the Management Explorer
under "Options > AlarmManager...".
The application prevents itself from being started more than once.
6.3.6
Acknowledging alarms with the Alarm Manager
The Alarm Manager offers the option of acknowledging alarms just like the Management
Explorer. The Alarm Manager, however, acknowledges all alarms at the same time. It is not
possible to acknowledge a specific alarm:
1. You can do this by right-clicking on the Alarm Manager icon in the system tray.
2. Select "Acknowledge all alarms".
SIMATIC IPC DiagMonitor V5.1.6
Operating Manual, 05/2021, A5E50981422-AA
Displaying operating data and alarms
6.3 Alarm Manager
29
Advertisement
Table of Contents
