Software Requirements - Siemens SIMATIC IPC DiagMonitor V5.1.6 Operating Manual

Hardware and software requirements

4.2 Software Requirements

4.2 Software Requirements
Requirement
At least one network adapter with TCP/IP.
Operating systems
The SIMATIC IPC DiagMonitor software can be used with the following operating systems:
• Microsoft® Windows® Server 2008 R2, 64-bit
• Microsoft® Windows® Embedded Standard 7, 32-bit (SIMATIC IPC configuration)
• Microsoft® Windows® Embedded Standard 7, 64-bit (SIMATIC IPC configuration)
• Microsoft® Windows® 7 Ultimate, 32-bit
• Microsoft® Windows® 7 Ultimate, 64-bit
• Microsoft® Windows® Server 2012 R2
• Microsoft® Windows® 10 Enterprise 2015 LTSB, 64-bit
• Microsoft® Windows® 10 Enterprise 2016 LTSB, 64-bit
• Microsoft® Windows® 10 Enterprise 2019 LTSC, 64-bit
• Microsoft® Windows® Server 2016
• Microsoft® Windows® Server 2019
Restriction
Remote monitoring is only possible using the TCP/IP Internet protocol with SNMP.
10
SIMATIC IPC DiagMonitor V5.1.6
Operating Manual, 05/2021, A5E50981422-AA