Siemens SIMATIC IPC DiagMonitor V5.1.6 Operating Manual page 31

5. Select the "Operation: on" box to enable the watchdog.
6. Select the type of reset. The following options are available for your selection:
– "Reset on" if you want a hardware reset to be performed if the watchdog times out.
– "Reset off" results in no action when the watchdog times out.
– "Restart" results in rebooting the operating system action when the watchdog times
– "Shutdown" results in shutting down the operating system action when the watchdog
SIMATIC IPC DiagMonitor V5.1.6
Operating Manual, 05/2021, A5E50981422-AA
out.
times out.
Note
The "Reset type" property depends on the device and its setting options are limited.
Configuration
7.1 Management Explorer
31