Cable Routing For Drive Bay 1 And Bay 2 - Lenovo ThinkSystem ST50 V2 Maintenance Manual

Cable routing for drive bay 1 and bay 2

Read this section to learn about cable routing for the drive in bay 1 and bay 2.
Drive bay 1
Figure 13. Cable routing for drive bay 1
Table 11. Cable routing for drive bay 1
Cable
1st 3.5 or 2.5 HDD SATA cable,
1
185 mm
1st 3.5 and 2.5 HDD Power Cable
2
(300 mm + 80 mm)
Make sure to follow the "Cable routing guidelines" in
For the system-board connector locations, see
From
Bay 1 drive signal connector
Bay 1 drive power connector
"Internal cable routing" on page
"System board components" on page
To
SATA 1 connector
SATA power 2 connector
19.
18.
.
Chapter 2 Server components
21