Attention:
• Read
"Safety inspection checklist" on page iv
work safely.
Watch the procedure
A video of this procedure is available at YouTube:
AU3iY3F7lq3qfqr5caGbIu
Procedure
Step 1.
Install the front bezel.
a.
Insert the three plastic tabs on the bottom of the front bezel with the corresponding slots on
the front of the chassis.
b.
Pivot the front bezel towards to chassis until it snaps into place.
Figure 66. Installing the front bezel
After you finish
Proceed to complete the parts replacement, see
Front panel replacement
Follow this procedure to remove and install the front panel.
Remove the front panel
Follow this procedure to remove the front panel.
ThinkSystem ST50 V2 Maintenance Manual
86
and
.
"Complete the parts replacement" on page
"Installation guidelines" on page 41
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
to ensure that you
158.