Install The Mono Amplifier (Speaker) - Lenovo ThinkSystem ST50 V2 Maintenance Manual

1. Install a new mono amplifier, see
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.

Install the mono amplifier (speaker)

Follow this procedure to install the mono amplifier (speaker).
S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all electrical current from the device, ensure that all power cords are disconnected from the
power source.
About this task
Attention:
1. Read "Safety inspection checklist" on page iv
work safely.
2. Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
Watch the procedure
A video of this procedure is available at YouTube:
AU3iY3F7lq3qfqr5caGbIu
Procedure
Step 1. Install the mono amplifier.
a. Insert the mono amplifier into the bracket on the inside of the chassis.
b. Fasten the screw to secure the mono amplifier to the chassis.
ThinkSystem ST50 V2 Maintenance Manual
118
"Install the mono amplifier (speaker)" on page
and
.
"Installation guidelines" on page 41
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
118.
to ensure that you