Lenovo ThinkSystem ST50 V2 Maintenance Manual page 99

1. Read "Safety inspection checklist" on page iv
work safely.
2. Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
Watch the procedure
A video of this procedure is available at YouTube:
AU3iY3F7lq3qfqr5caGbIu
Procedure
Step 1. Install the front panel.
a. There is a small tab on the right side of the front panel. Place the tab behind the front panel
slot on the chassis.
b. Align the guide hole and screw hole on the front panel with the guide pin and screw slot on
the chassis; then, install the front panel to the chassis.
Note: Make sure the small tab on the right side of the front panel is placed behind the chassis.
Figure 70. Installing front panel to chassis
and
.
"Installation guidelines" on page 41
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
Chapter 3 Hardware replacement procedures
to ensure that you
91