Only); Install The Processor - Lenovo ThinkSystem ST50 V2 Maintenance Manual

Figure 104. Removing the processor
After you finish
After removing the processor, perform one of the following tasks immediately:
• Install the replacement processor.
1. Install the replacement processor to the system board, see
only)" on page 135.
2. Package the defective processor that was removed, and return it to Lenovo. To prevent any shipping
damage, reuse the packaging of the new processor, and follow all available packaging instructions.
or
• Install the processor that you removed to the replacement system board.
1. Install the removed processor to the replacement system board, see
technician only)" on page
2. Package the defective system board, and return it to Lenovo. To prevent any shipping damage, reuse
the packaging of the new system board, and follow all available packaging instructions.
Install the processor (trained technician only)
Follow this procedure to install the processor. This procedure must be executed by a trained technician.
135.
"Install the processor (trained technician
"Install the processor (trained
.
Chapter 3 Hardware replacement procedures
135