Install The System Board - Lenovo ThinkSystem ST50 V2 Maintenance Manual
Hide thumbs
Also See for ThinkSystem ST50 V2:
- Setup manual (122 pages) ,
- Quick start (2 pages) ,
- Maintenance manual (192 pages)
Table of Contents
Advertisement
Figure 119. System-board screws removal sequence
Step 4.
Remove the system board from the chassis.
a.
Slide the system board toward the front of the server to release the serial port connector
from the chassis.
b.
Gently grasp the system board by the edges; then, tilt the system board, and remove it from
the chassis.
Figure 120. Removing the system board from the chassis
After you finish
1. Install a new system board, see
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Install the system board (trained technician only)
Follow this procedure to install the system board. This procedure must be executed by a trained technician.
ThinkSystem ST50 V2 Maintenance Manual
150
"Install the system board (trained technician only)" on page
150.
Advertisement
Table of Contents
