Lenovo ThinkSystem ST50 V2 Maintenance Manual page 67
Hide thumbs
Also See for ThinkSystem ST50 V2:
- Setup manual (122 pages) ,
- Quick start (2 pages) ,
- Maintenance manual (192 pages)
Table of Contents
Advertisement
Note: Remove the bay 2 drive cage first; then, proceed to remove the bay 1 drive cage.
a.
Slightly pull out the latch on the bay 2 drive cage to release it from the bay 1 drive cage.
b.
Pull the bay 2 drive cage out from the chassis.
Figure 42. Removing drive cage from drive bay 2
Step 3.
Remove the bay 1 drive cage.
a.
From outside of the chassis, remove the screw that secures the bay 1 drive cage to the
chassis.
b.
From inside of the chassis, remove the screw that secures the bay 1 drive cage to the
chassis.
c.
Pull the bay 1 drive cage out from the chassis.
.
Chapter 3
Hardware replacement procedures
59
Advertisement
Table of Contents
