Lenovo ThinkSystem ST50 V2 Maintenance Manual page 105
Hide thumbs
Also See for ThinkSystem ST50 V2:
- Setup manual (122 pages) ,
- Quick start (2 pages) ,
- Maintenance manual (192 pages)
Table of Contents
Advertisement
Step 3.
Tighten screw 1 and 2 first, then tighten screw 3 and 4.
a.
Partially tighten screw 1.
b.
Fully tighten screw 2.
c.
Fully tighten screw 1.
d.
Partially tighten screw 3.
e.
Fully tighten screw 4.
f.
Fully tighten screw 3.
Note: Do not touch the thermal grease while handling the heat sink and fan module.
Tightening the screws on the heat sink and fan module for processor with TDP lower than
95W
Figure 75. Tightening the screws on the heat sink and fan module for processor with TDP lower than 95W
Tightening the screws on the heat sink and fan module for processor with 95W TDP
.
Chapter 3
Hardware replacement procedures
97
Advertisement
Table of Contents
